Wanna Save Money for Replacing Touchscreen of your Phone ?

USE THIS MACHINE IF YOU WANT TO SEPERATE THE LCD FROM THE TOUCHSCREEN ON DEVICES. WHEN THE LCD IS STILL WORKING, AND YOU JUST WANT TO REPLACE A TOUCHSCREEN, YOU DO NOT NEED TO PURCHASE THE WHOLE ASSEMBLY ANYMORE. SAVE $$
Use this wonderful machine if you want to separate the LCD from the touch screen on devices, when the LCD is still functioning as it should. No need to purchase the whole assembly anymore if a screen is cracked!! Saves you $$$$$   

http://preview.alibaba.com/product/60101937968-800386225/LCD_Touch_Screen_Thermal_Heat_Separate_Machine_for_iPhone_Samsung_HTC_Etc_Under_7inch_Screen.html

Do you know how to use Touch screen panel separator machine ? Let me introduce to you step by step : 
1.Remove the frame from the LCD assembly. 

2.Put the LCD assembly on the metal plate with LCD side above and secure it with 4 adjustable clamps.

3.Turn the machine on and set the required temperature. 

4.Once the machine has reached the required temperature, carefully place the alloy cutting wire in place along the top of the LCD panel. Be careful around the delicate LCD panel.

5.Gently and slowly move the wire from left to right with downward pressure to work all the way from the top of the LCD to the bottom.

6.After the LCD has been separated, remove the LCD panel from the machine slowly and have caution with the hot metal plate. 

7.Apply the liquid optical clear adhesive on the LCD panel to clean the old glue. You may rub it or peal it off with your figures or scrape gently with a knife until the LCD is clean of residue.

8.Clean the LCD panel with a microfiber cloth. Place the LCD screen into the fitting molds. This machine comes with 7 different molds for different models of cell phones.

9.Apply the UV glue generously on the LCD panel and bond the new glass panel to it. Make sure the new replacement is free from dust, dirt or fingerprints. Make sure you use enough glue, otherwise air bubbles may appear. 

10.Apply pressure to the glass so the UV glue will disperses across the entire surface to make sure the two panels are perfectly bonded in place without any air bubbles. 

11.Place the LCD assembly under UV glue dryer lamp until the glue sets. 
12.Clean the UV glue residue from the LCD assembly and reassemble the frame. 
http://preview.alibaba.com/product/60104090832-800386225/7_Screen_Glass_Repair_machine_LCD_separator_For_IPAD_SAMSUNG_iPhone.html   
More details you need . pls feel free to contact me at sales.mishell@gmail.com or Whatsapp : 8613410849613 

XiYo Repair Machines for Phones store: Mishell shows you How To Separate LCD / Digitizer ...

XiYo Repair Machines for Phones store: Mishell shows you How To Separate LCD / Digitizer ...: All tools and equipment are available from  http://xiyo.en.alibaba.com/  I will be explaining how to use our new digitizer removal mach...

Mishell shows you How To Separate LCD / Digitizer / Glass On A Mobile Phone

All tools and equipment are available from http://xiyo.en.alibaba.com/ 

I will be explaining how to use our new digitizer removal machine to successfully separate the glass panel from the LCD / digitizer on a mobile device.

The machine, method and equipment used in this example can be used on any device under 7″ that has a bonded LCD / digitizer assembly such as:

• Samsung Galaxy SII,SIII, SIII Mini, SIV, SIV Mini, Note, Note II, Note III
• Apple iPhone 4, 4s, 5, 5s, 5c
• Apple iPod Touch 4^th and 5^th generation
• Many HTC’s, Sony, LG and Nokia phones

For this guide I will be removing the LCD and digitizer panel from the glass panel on an iPhone 4

This is the iPhone 4 LCD assembly I will be using, in this example the unit is an original Apple replacement removed from a functional phone

Original Apple iPhone 4 LCD assembly

Step 1 – Removal of the frame

Estimated working time – 2 minutes

Required equipment:

Spudger tool – Selection here

The frame surrounding the iPhone 4 and 4s is held into place using a mild adhesive, the most effective way to remove this is by using a nylon tool / spudger and sliding it around the frame for easy removal

Remove the frame 

Frame separated from LCD assembly 

Step 2 – Glass separation

Estimated working time – 10-16 minuets

Tools required:

Cutting Wire: Product code – XiYo-021

LCD touch screen separating machine : XIYO 003 

Lightly wipe the surface of the LCD assembly and digitizer removal machine plate removing any dust, remove and excess adhesive from the LCD left over from the frame separation.

Fit the digitizer assembly face down into the machine plate, adjust the clamps on the machine so the assembly is fully secured and held into position. 

Secure to machine using adjustable clamps

Turn the machine on, use the set button and use the up/down arrows to set the required temperature, once set the machine will remember the last set selection for next use.

Note: Top row (red) shows current temperature, bottom line (green) shows set temperature. 

Top row (red) shows current temperature, bottom line (green) shows set temperature.

For this example we are going to set the machine to 100 degrees, this is the best temperature to melt the adhesive, anything above 110 may damage the LCD screen.

The machine may vary by a couple of degrees during use.

While the machine is warming to the correct temperature you will need to remove the front camera spacer that is glued to the LCD assembly

Note: Only original Apple LCD assemblies have this spacer pre-attached, if the screen has been replaced in the past using an after-market spare this bracket will not be attached and this part can be skipped

Gently slide the front camera spacer from the glass to remove

Gently slide the plastic spacer away from the LCD assembly, this will require no force between 40-60 degrees as the adhesive will have softened.

Machine has now reached required temperature

Once the machine has reached the required temperature use cutting wire to separate LCD

Insert the cutting wire between the front glass and LCD

Once the machine is at the required temperature carefully place the cutting wire in place along the top of the LCD panel, its best practice to start at the end without the cables.

On the iPhone 4/4s you can separate the LCD with digitizer or separate the LCD panel only, choose how you wish to separate by positioning the cutting wire in the correct position – in this example we are going to remove the LCD panel with the digitizer panel attached.

Gently and slowly move the wire from left to right with downward pressure to work all the way from the top of the LCD to the bottom being careful to take time and care, in most case the same length of cutting wire can be used, in some cases the wire may break during use – if this happens removed the broken cable and start from the top.

Once the wire has made one pass you should made a further 1-3 passes (each pass being easier than the previous)

Once the LCD has been separated carefully remove the LCD panel being cautious of the heat and delicate LCD panel.

Successful separation of LCD / digitizer and glass panel

At this point it’s best to test to LCD and digitizer functions before proceeding.

Test the LCD / Touch screen (we are using a special diagnostic cable in this case)

Step 3 – Cleaning the LCD panel (and glass panel if required)

Working time: 5-8 minuets

Tools required:

UV Glue cleaning solution: Product Code – XiYo 019

Apply the UV Glue cleaning solution to the LCD and allow to react for 30 seconds, wipe the surface to remove any excess liquid.

The adhesive will be in a gel like state, the easiest way to remove this is to gently rub it off using your finger or thumb until the LCD / digitizer is clean from residue. 

Apply cleaning solution

Remove gel like residue by peeling or rubbing with finger or thumb

Removal of old glue, use more cleaning solution if required

Once the screen is free from the residue use a dry cloth to clean, for this we recommend a micro-fibre cloth

Clean the LCD / touch screen

At this point, again test the screen for functionality

Clean LCD digitizer assembly, ready to fit onto a new glass panel

If required use the same method to clean the glass panel. 

Check out more detailes on our website : http://xiyo.en.alibaba.com/ 

Best Regards,  Mishell Hu

http://xiyo.en.alibaba.com/

Email: sales003.szxiyo@gmail.com  

TM: cn1511814035

Skype: sales003.szxiyo

Mobile : +86 13544235697